Advertisement
2. Installing the system between the driver/passenger seat
(Refer to Figure 4)
1)Take one of the supplied straps from the lower compartment of
the bag, and connect the latch to the upper side metal ring on the
left side of the bag. Attach the "S" hook to the same ring after
looping the strap around the headrest of the driver's seat.Repeat
this process for the right side (Passenger Seat).
2)Take another strap and connect the latch to lower metal ring on
the left side of the bag. Attach the "S" hook to the same ring after
looping the strap around the driver's seat rail. Repeat this pro-
cess for the right side. In some vehicles, it may be necessary to
attach the "S" connector to the rail directly, as it may not be long
enough to reach back to the ring.
3) Adjust the straps tightly so that the bag is secured.
Figure 4
9
Advertisement
