Table of Contents
Advertisement
3. Touch
to confirm.
4. You will see the message: 'REGISTERING...'. Press and hold the
PAGE key on the cradle of the base unit.
5. 'REGISTRATION ACCEPTED' indicates that handset is registered.
'RETRY?' indicates that registration has failed. Touch
or
to quit.
NOTE : The base unit will then send a signal to the handset registering
the handset to the base unit. Once the Registration function has been
completed, the handset will return to Standby Mode.
TOUCH PHONE USE AND HANDLING
•
The touch panel handset offers a new experience in telephone.
communication. This Touch Sensitive keypad technology is very sensitive
and may take a little time to get used to. To avoid accidental key contact
while talking, first lift the handset to touch your ear, pause a brief moment
and then move the lower portion of the phone closer to mouth.
•
The keypad will automatically disable when the receiver first touches
your ear. This feature reduces the risk of accidental keypad activation
while the phone is held against the side of your face.
•
To get the best use out of your Touch phone, pick it up from the back
and sides and cradle it in your hand. While talking, the Smart Key Lock
prevents accidental key activation during a call.
•
It is very easy to tell when the keypad is disabled as the keypad backlight
will be off.
•
To turn keypad backlight on and activate the keypad,
touch any of the number keys, wait for the backlight
to come on, and then dial normally.
•
During a call, the keypad will be automatically
disabled and the backlight will turn off. When the
back light turns off and you wish to end
the call, press the
and then press the
•
Touching the LCD display may trigger the automatic
keylock sensor and prevent you from dialing. If the
keypad lock sensor is triggered, a small key will
appear in the top left corner of the display.
key to activate the keypad
key again to end the call.
4
to retry
Advertisement
Table of Contents
