Advertisement
[CHART 7]
Camera uncontrollable
• No panning, no tilting
• No control over the lens
• No control over the power
switch
Connect the waveform
monitor to the video input
section
Verify that
control data are observed on
18H and 19H, when
trying to control
NO
Exchange the input board
Verify that
control data are observed on
18H and 19H, when
trying to control
NO
Exchange the CPU-185 board
Verify that
control data are observed on
18H and 19H, when
trying to control
NO
Press the lens key
on the keyboard
Verify that
control data are observed on
18H and 19H, when
trying to control
NO
Verify that the internal bus,
KBDATA, is in good shape
3-8
Make sure that you do the following, before going to CHART 7.
• Select the camera in question using the keyboard
• Set the receiver type
[Equipment] Waveform monitor
YES
Receiver and panning/tilting
sections are defective
YES
The input board is defective
YES
The CPU-185 board is
defective
YES
The keys of the keyboard
are defective
Refer to the manuals for
peripherals in question
The input board is out of
order. Repair it
The CPU-185 board is out of
order. Repair it
Replace the device
CSP-5000E
CSPK-5000E
Advertisement
Chapters
