Safety Information; Grounding Instructions - Volvo Mode 2 Instructions Manual

Safety Information

A RISK OF FIRE OR ELECTRIC SHOCK
CAUTION:
To reduce the risk of fire, connect only to a circuit provided with Type B / C 20A breaker for IEC 60309
Blue 1P16A, Type I, Type G, CEE 7/7 AC input plug, and a circuit provided with Type B / C / D 20A
breaker for IEC 60309 Red 3P16A, and Type B/C/D 40A breaker for IEC 60309 Blue 1P32A AC input
plug.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
The charging cable is intended only for charging vehicles not requiring ventilation during charging.
Read the safety information and instruction carefully before you install and operate the charging cable to avoid fire and injury.
 Read all the instructions before using this product.
 Always follow local electrical regulation when using the charging cable.

Always conduct a visual inspection to ensure no physical damage to charge cable outlook. Stop using it
immediately and contact local Customer Support if there is any damage.
 DO NOT use the charging cable with damaged socket-outlet.
 DO NOT use this product if the flexible power cord or EV cable is frayed, has broken insulation, or any other
signs of damage.
 DO NOT use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other
indication of damage.
 Children should be supervised when in the vicinity of the charging cable, when the charging cable is connected.

DO NOT put your fingers into the connector.
 DO NOT use the device at potentially explosive atmosphere areas.

DO NOT pull the charging cable while it is in charging session.
 DO NOT use the charging cable with an extension cord and the adapter of vehicle connector.
 DO NOT make any unauthorized changes or modifications to the charging cable.

DO NOT remove any identifiers such as safety symbols, warning instructions, plates, labels or cable markings.
 Must disconnect the AC plug from AC socket-outlet when using adapter plug.
 Repair work to charging cable shall only be performed by the manufacturer.

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment
grounding conductor and a grounding plug. The plug must be plugged into an appropriate socket-outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
WARNING:
!
Improper connection of the equipment-grounding conductor is able to result in a risk of electric shock. Check
with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product – if it will not fit the socket-outlet, have a proper socket-
outlet installed by a qualified electrician.
1