Assembly; Controls; Continuous Monitoring - Dyson Pure Hot+Cool HP05 Operating Manual

Assembly

Use both hands to lift the Slide the buttons down on both
machine out of the box, sides of the shrouds.
taking care to hold by the
base of the machine only. The shrouds will release with the
glass HEPA filters attached.
Do not lift out by the
amplifier loop.
8
Take the carbon filters out Position the shrouds onto the base
of the box and remove the and push gently until they click
protective packaging. securely into place.
Attach both carbon filters to Place the remote control on
the machine. the top of the machine with the
buttons facing down.
Plug in and switch on.

Controls

Remote
control
Standby
ON/OFF
Standby ON/OFF
Airflow speed
Auto mode
Oscillation
ON/OFF
Sleep timer
Tilt control
Continuous
monitoring
With continuous monitoring
enabled, your appliance will
Information menu
gather air quality, temperature
and humidity information, which is
displayed on the LCD screen.
Heating control
By default, continuous monitoring
is disabled. Once enabled,
Cooling mode
continuous monitoring is
always active.
Airflow direction
To enable/disable
Night mode

continuous monitoring:

Press and hold the Auto mode
button on the remote for 5 seconds
to enable it. The LCD screen
will indicate when continuous
monitoring is enabled or disabled.
9