Table of Contents
Advertisement
GB
CLEANING
First of all switch off the unit and pull the plug.
Clean the housing with a soft, damp cloth. Never use aggressive chemicals, petrol,
detergents or other cleansing solutions.
Filter
The single layer screen filter cleans the circulated air. The filter needs to be cleaned
regularly with a vacuum cleaner to avoid blocking the air flow.
• Push the two clips on the filter housing downward and pull the filter housing
forward and out of the unit.
• Remove the rear retainer from the housing by gently prising it from the retaining
clips.
• Insert the screen filter aligning the two cut outs with the clips on the top of the
filter housing.
• Reverse the procedure to re-fit the housing in the air conditioner.
Notice! Never use the air conditioner without filter.
STORAGE
See the instructions "Emptying the water container" on page 7.
• Drain the condensed water completely.
• Clean (or replace) the filter.
• Put the unit on a sunny day in fan mode for a couple of
hours to ensure that the inside becomes completely dry.
• Store the power cable as shown, protect the unit against
dust and store in a dry place not accessible for children.
ELECTRIC CONNECTION
Important: how to wire a 13 amp plug
The wires in the mains lead on this appliance are
coloured in accordance with the following code:
G
Y
– E
REEN AND
ELLOW
As the colours may not correspond with the markings
identifying the terminals in your plug proceed as
follows:
The
G
Y
REEN AND
ELLOW
terminal in the plug which is marked with the letter
E or with the earth symbol
yellow.
The
wire must be connected to the terminal marked N or coloured black.
B
LUE
The
wire must be connected to the terminal marked L or coloured red.
B
ROWN
8
B
– N
ARTH
LUE
EUTRAL
wire must be connected to the
or coloured green and
B
– L
ROWN
IVE
BLUE
Neutral
Cord clamp
Cable storage
GREEN/YELLOW
Earth
BROWN
Live
FUSE
13 Amp
Hide quick links:
Advertisement
Table of Contents
