Atp3 Setup - Altec Lansing ATP3 User Manual

Set Up Instructions
(See Figure 2)
Do not insert the AC power
plug into the wall outlet
until all connections are
made.
Make connections as shown in
Figure 1.
1) Connect the LEFT SATELLITE
SPEAKER to the SUBWOOFER.
Connect BROWN PLUG from the
LEFT SATELLITE SPEAKER into
the jack on the subwoofer
marked LEFT.
2) Connect the RIGHT
SATELLITE SPEAKER to the
SUBWOOFER. Plug the speaker
wire with the ORANGE
connector into the
corresponding jack on the back
of the subwoofer marked RIGHT.
Note that this connector has an
arrow on it. This arrow should
face up as shown in Figure 1.
3) Connect the SUBWOOFER to
the computer. The lime color-
coded wire connects the input on
the subwoofer to the audio output
on your computer.
Figure 2
ORANGE
LIME
LEFT RIGHT INPUT
LEFT RIGHT INPUT
BROWN
ATP3 Setup Instructions