Removing The Scanner Cartridge - Canon BJC-50 User Manual

3. Press down gently on the high side of the Scanner Cartridge until it snaps in place.
4.
Wait about three seconds and press the CARTRIDGE button once.
After the Scanner Cartridge is installed, the printer requires at least two seconds to detect the
presence of the Scanner Cartridge, then the Scanner Cartridge moves to the home position.
5.
Close the top cover.

Removing the Scanner Cartridge

Remove the Scanner Cartridge as soon as you are finished scanning and replace it with a BJ
Cartridge.
To avoid problems with printer and Scanner Cartridge operation, never leave the Scanner Cartridge in
the printer longer than necessary. Alway remove the Scanner Cartridge and store it when it is no
longer in use.
Check the printer POWER lamp and make sure that it is on. If the lamp is off, press the
1.
POWER button to switch the printer on.
2.
Press the CARTRIDGE button. The cartridge holder moves to the center.
76
76