Grundig 32 VLE 6520 BH Service Manual page 33

Operating Hints
This chapter contains excerpts from the operating instructions. For further particulars please refer to the appropriate user instructions which can be downloaded by www.grundig.com, submenu Downloads/Manuals.
OVERVIEW
--------------------------------------------------------------------------------------------------------------
Connections on the television set
Optic Out Audio output sockets
(optical) for PCM/Dolby
Digital signals. It is for digital
multichannel audio/video
amplifier or AV receiver con-
nections.
U
Headphone connection (3.5
mm jack);
External audio output (with
headphone-RCA converter).
PC Audio IN Audio signal input for PC;
Audio signal input (YUV
signal).
PC-IN VGA socket, video signal
input for PC;
Video signal input (YUV
signal).
AV1 / S-VHS
Euro/AV socket (CVBS sig-
nal, RGB signal); video sig-
nal input for S-Video camera
(with Scart-S-VHS converter).
ANT IN
Antenna socket.
SATELLITE Satellite antenna socket.
HDMI4 (ARC) HDMI socket, audio/video
signal input (HDMI).
ENGLISH 9
OVERVIEW
--------------------------------------------------------------------------------------------------------------
HDMI3 HDMI socket, audio/video
signal input (HDMI).
LAN Network cable connection
socket.
HDMI2 HDMI socket, audio/video
signal input (HDMI).
HDMI1
HDMI socket, audio/video
signal input (HDMI).
USB2 (HDD) USB Harddisk socket for ex-
ternal data medium and PVR
function;
Grundig WiFi USB dongle
or wireless keyboard, mouse
port.
USB1 USB socket for external data
medium and PVR function;
Grundig WiFi USB dongle
or wireless keyboard, mouse
port.
CI Common interface slot.
10 ENGLISH
Control buttons on the TV
ON • OFF Power switch, switches the
television into standby mode
and off.
Multi function switch
8
/I/SEL« on the
Using the multi function switch »
television different settings can be made.
There may be no menus visible on the screen.
Pressing the switch, switches in the television
from standby mode.
In operation: Pressing the switch displays the
navigation menu.
Moving the switch up or down selects the
desired menu item:
– Set to Volume Navigation;
– Set to Channel Navigation;
– Open Input Source Menu;
– Go to Standby.
Access function/setting by pressing.
Moving the switch up/down selects the func-
tion/setting.