the current has fallen below the minimum
of 50 mA.
To ensure reliable operation of the bulb failure
indicator, each LED chain in the trailer lighting
must be guaranteed a minimum current of
50 mA.
Trailer with 7-pin connector
General notes
Trailers with 7-pin connector: you can
make a connection to the 13-pin connector
on the ball coupling using an adapter plug or,
if necessary, an adapter cable. Both can be
obtained in a qualified specialist workshop.
Fitting the adapter
! Make sure that there is sufficient cable
play so that the cable cannot become
detached when cornering.
Open the socket cover.
X
Insert connector with lug : into
X
groove ; of the socket. Turn the connec-
tor clockwise to the stop.
Let the cover engage.
X
If you are using an adapter cable, secure
X
the cable to the trailer with cable ties.
Towing a trailer
Z
225