Mercedes-Benz E-Class Owner's Manual page 148

Hide thumbs Also See for E-Class:
Table of Contents

Advertisement

THERMOTRONIC automatic climate
control
THERMOTRONIC automatic climate control zones
You can select different temperature settings
for the driver's and front-passenger sides as
well as for the rear compartment.
Turn the key to position 2 in the ignition
X
lock.
To increase/reduce the temperature in
X
the front compartment: press switch F
or J up or down (
Only change the temperature setting in
small increments. Start at 22 †.
To increase/reduce the temperature in
X
the rear compartment using the front
control panel: press the á button.
The indicator lamp above the á button
goes out.
Press switch F or J up or down
X
(
page 142).
Y
Only change the temperature setting in
small increments. Start at 22 †.
To increase/reduce the temperature in
X
the rear compartment using the rear
control panel: press button K or
M(
page 142).
Y
Only change the temperature setting in
small increments. Start at 22 †.
Operating the climate control system
page 142).
Y
Setting the air distribution
Air distribution settings
P Directs the airflow through the centre
and side air vents
O Directs the airflow through the foot-
well air vents
S Directs airflow through the centre,
side and footwell air vents (Cabriolet
or Coupé only: only for certain coun-
tries).
¯ Directs the airflow through the demis-
ter vents
b Directs the airflow through the demis-
ter, centre and side air vents (Cabriolet
only).
a Directs the airflow through the foot-
well and demister vents
i
Regardless of the air distribution setting,
airflow is always directed through the side
air vents. The side air vents can only be
closed when the controls on the side air
vents are turned downwards.
THERMATIC automatic climate control
Turn the key to position 2 in the ignition
X
lock.
Press switch F up or down repeatedly until
X
the desired symbol appears in the display
(
page 141).
Y
THERMOTRONIC automatic climate
control
Turn the key to position 2 in the ignition
X
lock.
Press switch I up or down repeatedly until
X
the desired symbol appears in the display
(
page 142).
Y
145
Z

Advertisement

Table of Contents
loading

Table of Contents