Advertisement
14) Detach hose from extension wand by grasping each piece and pulling them
apart. Do the same to detach the foot.
15) Insert broomstick through wand and hose to clear debris.
16) Also, inspect hose section by section for holes or cracks. If a hole or crack is
found,
BISSELL Consumer Care: please refer to product changeover guide.
External Support: Contact BISSELL
17) Reattach pieces by inserting them into their corresponding parts.
18) Turn machine on. If the machine is still blowing dust,
BISSELL Consumer Care: please refer to product changeover guide.
External Support: Contact BISSELL
Updated by A. Lentz 10/8/2021 P:\Customer Service Dept\Knowledge Base\Troubleshooting\TROUBLESHOOTING GUIDES NEW
MODELS\VACUUM\Troubleshooting 1994F\1994F Blowing Dust.docx
Advertisement
