Usage Maintenance - Vax Integra Instruction Manual

Vax V-126 User Guide.qxd:V-126 User Guide
Emptying the handheld dirty water tank
Press the handheld dirty water tank release button
(Fig.5/10).
Fig.5/10
Unscrew the cap (Fig 5/11).
Fig.5/11
Turn upside down and empty the soiled water into a sink
Rinse well with clean water and return to the unit.
Reset Button
This unit is equipped with a safety reset button (Fig 5/12).
When the brushbar fails to rotate, press the button to
restart.
Fig.5/12
17/9/07
All manuals and user guides at all-guides.com
14:18 Page 7
6. Maintenance
Cleaning the filter
Remove the handheld from the cleaner (refer to Section 5)
Remove the handheld dirty water tank as directed
Remove the filter and wash under a tap (max 40°C)
(Fig.6/1) . Allow to air dry thoroughly before replacing in
the machine.
Fig.6/1
Changing the brushbar and belt
To access the brushbar and belt, you will require a Philips
screwdriver. Lie the unit down on a flat surface, with the
underneath of the dirty water tank facing you (Fig.6/2).
Fig.6/2
Remove the screw (Fig.6/3).
Fig.6/3
Remove the cover (Fig.6/4) and the belt can be taken off
the spindle. To remove the brushbar, the screws at either
end must be undone first.
usage / maintenance
Vax Careline 0870 606 1248
7