Table of Contents
Advertisement
TP CHASSIS / TELEVISION
Panel folder contains panel software. Ursa folder is only included in 100Hz panels
and contains 100Hz software. As all panels are 100Hz or 200Hz in TP-Chassis
products, all folders contain URSA folder in TP.
There are not any critical control elements for other folders.
Shut down TV before inserting USB to TV for software update. (Disconnect the
power)
Then, insert USB to TV; press any key of the keypad on TV and plug the TV.
Hold down any key of the keypad on TV until you see that code installation has
started.
USB update logo will be shown on the screen during software download from USB.
If code installation has been successfully completed, TV will automatically turn on.
Shut down TV to remove the USB.
14.2. BOOT Code Installation From Service Menu via USB Memory
Boot code update can be performed on TV's factory or customer mode.
Boot code to be installed should be listed under USB memory's main directory with
the name "mboot.bin". Check if "mboot.bin" file is included in the software
downloaded from the system.
103
September 2011
Advertisement
Table of Contents
