Canon SELPHY ES2 User Manual page 22

Placing/Connecting the Printer
Set up and connect your SELPHY printer in the following manner for safe use.
• Do not place the equipment on an unstable or tilted surface.
There is risk that the equipment may fall and cause injury.
• Do not block the air vents on the back of the printer.
To power outlet
1
Place the printer on a flat surface.
2
Connect the supplied power cord to the supplied compact power
adapter.
3
Insert the plug into a power outlet.
4
Connect the compact power adapter to the printer.
• The SELPHY ES2 can also be used with the separately sold battery pack NB-ES1L (p. 73).
22
Getting Started
15 cm
(6 in.) 10 cm
(4 in.)
Leave more than 15 cm
(6 in.) of clearance at the
front and back of the
equipment and 10 cm (4
in.) of clearance on both
sides.
15 cm
(6 in.)