Troubleshooting - Element ELEFW401A Instruction Manual

All manuals and user guides at all-guides.com

TROUBLESHOOTING

If your TV does not operate normally or cannot be turned on, please check
the following troubleshooting questions. Remember also to check any other
connected electronic device, such as DVD or blu-ray player to pinpoint the
problem. If the TV still fails to operate normally, please contact technical support
5HIHU WR :DUUDW\ SDJH 
SYMPTOM POSSIBLE CAUSE
Dead. No LED lit No power to the TV.
Dead. No LED lit red Set in standby mode.
No signal.
Blue screen
Incorrect
source selected.
Noisy, snowy, ghosting
Poor antenna signal.
SLFWXUH 79
Sound "Mute".
Volume set too low.
No sound
External leads
not connected "if used".
22
REMEDY
‡ Check all connections to the
79 V $& VRFNHW
‡ Press either the Power button
or the Standby button on the
remote control.
‡ Press the SOURCE button to
select the correct source.
‡ If using an indoor antenna, try
adjusting the antenna position.
Check antenna connections.
‡ Turn sound "Mute" off.
‡ Check volume settings.
‡ Check that all external leads
are connected properly.