LG F1255FD Owner's Manual page 37

Symptoms
Washing machine does
not start
Washing machine will
not spin
Door does not open
Wash cycle time
delayed
Fabric softener
overflow
Softeners dispensed
too early
Dry problem
36
Reason
Electrical power cord may not be
plugged in or connection may be
loose.
House fuse blown, circuit breaker
tripped,or a power outage has
occurred.
Water supply tap is not turned on.
Check that the door is firmly shut.
Too much softener may cause an
overflow.
Does not dry
Solution
• Make sure plug fits tightly in wall outlet.
• Reset circuit breaker or replace fuse. Do
not increase fuse capacity. If problem is
a circuit overload, have it corrected by a
qualified electrician.
• Turn on water supply tap.
• Close the door and press the Início/
Pausa button. After pressing the Início/
Pausa button, it may take a few moments
before the washing machine begins to
spin. The door must be locked before spin
can be achieved. Add 1 or 2 similar items
to help balance the load. Rearrange load
to allow proper spinning.
• Once washing machine has started,
the door cannot be opened for safety
reasons. Check if the 'Door Lock' icon is
illuminated. You can safely open the door
after the 'Door Lock' icon turns off.
• The washing time may vary by the
amount of laundry, water pressure, water
temperature and other usage conditions.
If an imbalance is detected or if the suds
removing programme is on, the wash time
will increase.
• Follow softener guidelines to ensure
appropriate amount is used. Do not
exceed the maximum fill line.
• Close the dispenser drawer slowly. Do not
open the drawer during the wash cycle.
• Do not overload. Check that the washing
machine is draining properly to extract
adequate water from the load. Clothes
load is too small to tumble properly. Add a
few towels.