Safe Installation - Siemens KG N Series User Manual

NL Safety
1.5 Secure installation
WARNING ‒ Risk of electric shock!
Improper installations are dangerous.
▶ Only connect and use the device in accordance with the
information on the type plate.
▶ Only connect the device to a mains supply with alternating
current via a properly installed earthing socket.
▶ The protective earth system of the electrical house installation must be
installed in accordance with the electrical engineering regulations.
▶ Never power the device via an external switching device, e.g. a
time switch or remote control.
▶ When the device is installed, the mains plug of the mains
connection cable must be freely accessible, or if free access is not
possible, an all-pole disconnecting device must be installed in the
permanently installed electrical system in accordance with the
installation instructions.
▶ When setting up the device, make sure that the power cord is
not pinched or damaged.
Damaged power cord insulation is dangerous.
▶ Never bring the connecting cable into contact with heat sources.
WARNING ‒ Risk of explosion!
If the ventilation openings of the device are closed, a flammable
gas-air mixture can form in the event of a cold circuit leak.
▶ Do not block ventilation openings in the housing of the device or in
the installation housing.
WARNING ‒ Risk of fire!
Using an extended power cord and unauthorized adapters is
dangerous.
▶ Do not use extension cords or multiple sockets.
▶ If the power cord is too short, contact customer service.
▶ Only use adapters approved by the manufacturer.
90