Getting Ready To Start Recording; Inserting/Ejecting A Memory Card (Not Supplied) - Samsung HMX-W200RN User Manual

Getting ready to start recording

INSERTING/EJECTING A MEMORY CARD (NOT SUPPLIED)

To insert a memory card
1
Turn off the product. Then, slide the Open/Close lever in the
direction of the arrow and open the memory card cover as
shown in the figure above.
2
Insert the memory card into the card slot until it softly clicks.
Make sure that the brand label portion of the card is facing
•
left and the product is placed as shown in the figure.
3
To close and lock the memory card cover, close the cover, and
then slide the Open/Close lever in the direction of the arrow as
show in the figure.
• To avoid the data loss, turn off the product by pressing the Power ( ) button before inserting or ejecting the memory card.
• If you eject the memory card from the product while it is on, the product turns off.
• Be careful not to push the memory card too hard. The memory card may suddenly pop out.
Your product supports only micro SD and micro SDHC cards.
Compatibility with the product may vary depending on the manufacturer and the type of memory card.
To eject a memory card
1
Turn off the product. Then, slide the Open/Close lever in the
direction of the arrow and open the memory card cover as
shown in the figure above.
2
Gently push the memory card to eject it.
3
To close and lock the memory card cover, close the cover, and
then slide the Open/Close lever in the direction of the arrow as
show in the figure.
2
1
29