Getting Started; Charging The Battery - Samsung HMX-W200RN User Manual

Getting started

CHARGING THE BATTERY

Battery for this product is built into the product.
• Be sure to charge the battery before you start using your product.
• You can charge the battery with the built-in USB plug.
1
2
1
Press the Power ( ) button to turn off the product.
2
Slide and open the Open/Close lever in the direction of the arrow
to pop out the built-in USB plug, as shown in the figure.
When you press the USB open lever, the USB plug will pop
•
out if the built-in USB plug cover is open.
3
Connect the built-in USB plug of the product to the USB port
of a PC and please check if the USB port complies with the
standard of rated power limit.
The charging (CHG) indicator lights up and charging starts.
•
After the battery is fully charged, the charging (CHG) indicator
turns green.
4
When the charging is completed, detach the USB plug from the
PC, and then push in the built-in USB plug.
5
Slide and close the Open/Close lever in the direction of the
arrow to close the built-in USB plug cover, as show in the figure.
• Do not force the built-in USB plug.
• Depending on your computer environment, you can attach an
external USB cable (not supplied) to the product's USB plug and
your computer's USB port to charge the product.
• The battery does not charge if you operate the product when it is
connected to a PC. To charge the battery when it is connected to
your PC with the built-in USB plug, you must turn the product off.
2
1
21