Unfolding The Shaft; Attaching The Telescopic Extension Shaft; Connecting The Vacuum Hose - Parkside PWDS 920 B2 Operation And Safety Notes

m
IMPORTANT!
You must fully assemble the product before
u
using it for the first time!
m
WARNING!
Always pull the power plug before
making adjustments to the product .
˜ Unfolding the shaft
(Fig . C)
Unlocking: Set the folding hinge lock
the position .
Hold the shaft and unfold the front
13 ] [
part until the folding hinge lock
engaged .
Locking: Set the folding hinge lock
the position .
˜ Attaching the telescopic
extension shaft
(Fig . D)
NOTE
The telescopic extension shaft
u
for rooms with high ceilings .
Unlocking: Fold up the lock lever
Insert the telescopic extension shaft
the connector (on the main handle
14 ] [
Adjust the length .
NOTE
u
u
u
to
Locking: Fold down the lock lever
[ 11 ]
˜ Connecting the vacuum hose
is fully
11 ] [
(Fig . E, F, G)
m
to
[ 11 ]
NOTES
is suitable
22 ] [
u
.
[ 21 ]
into
[ 22 ]
) .
[ 20 ]
u
Insert the hose coupler
connector
The maximum length is indicated on the
telescopic extension shaft
Pulling the telescopic extension shaft out
: The Max marking
of the main handle
20 ] [
must remain hidden inside the main
handle or be aligned with the edge of the
connector .
[ 14 ]
Do not pull the telescopic extension shaft
out further .
WARNING!
Always wear a dust mask when
sanding . Using this product generates a
large amount of dust . Harmful dust may
be generated when sanding surfaces
coated with lead-based paint .
Attach an external dust extraction
unit (e .g . vacuum cleaner) to the hose
adaptor (at the end of the vacuum
29 ] [ 30 ] [
hose ) . In this way, you protect yourself
[ 28 ]
as well as persons in the vicinity from dust
and you keep the workplace clean .
You may connect the vacuum hose
the connector on the main handle
[ 14 ]
to the connector on the rear handle
[ 24 ]
26 ] [
/ , until it is fully engaged .
[ 14 ] [ 24 ]
.
[ 22 ]
.
21 ] [
to
28 ] [
or
20 ] [
.
23 ] [
into the
GB/IE/NI 17