Sharp LC-32SV502B Service Manual page 12

LC-32SV502B/LC-42SV502B/LC-42SV602B/LC-46SV602B/LC-46SV502L
Detaching the Stand Neck for Wall Mounting
Caution
• Please use with care while disassembling the cabinet, stand, and pillar for wall mounting.
• Detach the stand neck in the correct direction.
• Do not remove the stand neck from the TV unless mounting it with an optional wall mount
Loosen the 4 screws that secure the stand neck by using a cross-head screwdriver. Remove the stand cover from the TV set.
Note
• To attach the stand neck, perform the steps in reverse order.
• Do not overtighten the screws and install the TV set without the stand cover.
Wall Mounting
TV screen size (Inches)
Note
• At the time of purchasing wall bracket, please check if there is enough space between the wall bracket and TV terminals for the terminal connection
Preparation
Installing Batteries in the Remote Control Unit
1 Remove the battery compartment from the remote control.
2 Insert two "AAA" size batteries (supplied with the product).
LC-46SV502L
• Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment.
VESA-compatible wall bracket
LC-46SV502L
LC-46SV602B
LC-42SV602B
LC-42SV502B
LC-32SV502B
(millimeters) (W x H)
400 x 400 mm
400 x 400 mm
400 x 400 mm
200 x 100 mm
12
Screw type
Metric 6 x 14 mm
Metric 6 x 16 mm
Metric 6 x 16 mm
Metric 4 x 14 mm