Bluetooth - Samsung YP-G1CW User Manual

Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your device searches for available Wi-Fi
connections, then displays them on screen.
From any screen, sweep your finger downward from the
1.
top to display the Notification Panel.
Touch Wi-Fi to turn Wi-Fi On. Your device automatically
2.
scans for available Wireless Access Points.
When the scan is complete, touch a Wi-Fi network to
3.
connect. If the Wi-Fi network is open, your device
automatically connects. If the Wi-Fi network is secured,
enter the password at the prompt to connect.
Adding a Wi-Fi Network Manually
From a Home screen, touch the Menu Key
1.
Wireless and network
Touch Wi-Fi to turn Wi-Fi On.
2.
Touch Add Wi-Fi network, then enter information about the
3.
network:
• Network SSID: Enter the name of the Wi-Fi Wireless Access Point.
• Security: Select the type of security used by the WAP.
• Password: If the WAP is secured, enter the password or hex key.
82
Settings
Wi-Fi settings.
Note: Depending on the Security protocol used by the WAP, additional
network information may be required.
Touch Save to save the settings.
4.

Bluetooth

Bluetooth is a short-range wireless communications technology
for exchanging information over a distance of about 30 feet.
You do not need to line up the devices to send information with
Bluetooth. If the devices are in range, you can exchange
information between them, even if they are in different rooms.
Configuring Bluetooth Settings
Configure your device's Bluetooth settings. For more information,
refer to "Bluetooth Settings" on page 106.
Turning Bluetooth On or Off
Turning Bluetooth On
From any screen, sweep your finger downward from the
1.
top to display the Notification Panel.
Touch Bluetooth to turn Bluetooth on.
2.
Note: When Bluetooth is on, the Bluetooth icon
Bar.
displays in the Status