Voice Method
Use the Voice Service Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Contacts command does not dial phone numbers for a Contact.
To look up information for a specific Contact:
In Standby mode, tap Menu
1.
"Say a Command" appears in the display and plays through
the speaker.
Say "Contacts".
2.
Voice Service prompts you to "Say the name."
Speak clearly and say the full name of the person you want to
3.
call, exactly as it is entered in your Contacts list.
• If Voice Service recognizes the name you said, the contact information
for that name appears in the display.
• If Voice Service does not recognize the name you said, a choice list of up
to three names appears in the display, and Voice Service prompts you
with "Did you say?" followed by the first name on the list.
Say "Yes" to confirm the name or "No" to hear the next name,
4.
or use the keypad to select the correct name from the list. (For
more information, refer to "Confirm Choices" on page 141.)
• To say the name again, tap Repeat.
67
Menu 3
Voice Commands.