Voice Commands
The voice recognition capabilities of your R640 are exceptional due to
advanced, speaker-independent technology. This means you do not
need to "train" your phone to understand your voice. You can use
your voice in a natural manner to dial numbers.
Note: End Calls Before relaunching the Voice Service voice recognition
software — When you use Voice Commands to make a call, you must end
that call before you can use other Voice Commands. (For more information,
refer to "Voice Service" on page 138.)
Use the Call command to dial any number stored in your Contacts list
by saying the name of the contact (Name Dialing). You can also use
Call to dial any telephone number, even numbers not stored in your
contact list, by speaking the individual digits in the number (Digit
Dialing).
Voice Dialing Tips:
Wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking to someone on the
•
phone.
When saying a name, say the first name then the last name.
•
Call Functions
44