– Lookup: Lets you look up and display contact information for any name
stored in your Contacts list by saying the name.
– Go to: Lets you access all of the Main Menus on your phone.
– Check: Lets you check your phone's status (that is, network coverage,
signal strength, and battery in the same report), network coverage, signal
strength, battery, and phone number.
Voice Command Tips:
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
•
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and voice-
activates all the names stored there. When you have add or change
contacts, VoiceSignal automatically reloads and voice-activates the
entire list.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
53