Installation instructions
To install the detectors correctly, certain rules must be followed.
Do not place the detector on an unstable support
(such as a mesh or a poorly fixed post)
Transmitter
Transmitter
3.
Installation
To attach the detectors to a metallic support, drill 4 holes measuring 3 mm and use the
sheet metal screws provided.
To fix the detectors to a wall, use appropriate screws and wall plugs for the type of wall
(we recommend at least Ø5 x 30 screws).
• Drill 4 holes and insert wall plugs.
• Position the holes in the adjustable support over the wall plugs.
Do not install receivers facing the
directed or reflected rays of the
sun or alongside highly reflective
surfaces.
Channel 1
Channel 2
Receiver
Make sure that no vegetation can interrupt
the beams.
When detectors are placed one
above the other, make sure they
are configured to use different
Receiver
channels.
Receiver
3
5° min.
Transmitter