Table of Contents
Advertisement
Power Saving Mode
This mode allows you to save power because the phone analyzes
the displayed screen image and adjusts the LCD brightness.
From the Home screen, touch
1.
Touch Power Saving mode to activate the feature. A check
2.
mark displayed next to the feature indicates Power Saving
mode is active.
Connecting your Phone to the TV
TV out
This feature allows you to connect your phone to your television
(using an optional cable) and view any imaged stored on the
phone from the television.
Note: The TV system (NTSC) option is used if you are connecting to an older,
analog NTSC system.
To use the TV out feature:
From the Home screen, touch
1.
TV out.
2.
Touch one of the following options:
• TV out: to play all of the phone's video output through the TV-out
feature.
162
Note: NTSC is usually used in America.
Settings
Display.
Horizontal Screen Calibration
Important!: Please do not move the device while the phone calibrates.
Settings
Display
• TV system: to play the phone's video out through an analog TV
video system converter (NTSC/PAL).
When you use this feature, the accelerometer is used to calibrate
the phone when held in a horizontal position.
From the Home screen, touch
1.
Horizontal calibration.
Place the device on a level surface and tap Calibrate.
2.
The phone adjusts the level of the accelerometer. During
the calibration process a green circle appears onscreen
and the center circle adjusts to the center position.
Settings
Display
Advertisement
Table of Contents
