Table of Contents
Advertisement
Press
and then tap Manage Conference Call.
1.
Tap
(Split) adjacent to the participants you would
2.
like to split from the current call. The list displays the
callers in the order they were dialed.
Tap the number for the participant in which you want to
3.
speak privately.
You can now talk privately to that person while the other
participants can continue to converse with each other. If
there is only one other participant, that person is placed on
hold.
To return to the multi-party call, tap the Merge icon. This
4.
action joins both participants into a single multi-party call.
If the multi-party call participants can now hear each other.
Dropping One Participant
Press
and then tap Manage Conference Call.
1.
From within an active conference all tap
2.
of the party. The participant is disconnected and you can
continue the call with the other participant.
Tap
to end the current call.
3.
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and you
must have previously set the Call waiting option to Activate.
You are notified of an incoming call by a call waiting tone. For
more information, refer to "Configuring Voice Calls" on
page 189.
To answer a new call while you have a call in progress:
1.
Note: The new caller appears at the top of the list. The previous caller is
2.
End
3.
to the right
In a single motion, touch
answer the new incoming call.
placed on hold and appears at the bottom of the list.
Tap Swap to switch between the two calls. This places the
new caller on hold and activates the previous call. The
active call displays with a green background.
Tap Swap again to switch back.
Call Functions and Contacts List
and slide it to the right to
64
Advertisement
Table of Contents
