Configure Bios To Boot From Ssd - Dell EMC Virtual Edge Platform 1405 Series Operating System Installation Manual

Table of Contents

Advertisement

Figure 36. Disk selection screen
4. Form the Keyboard layout screen, highlight the US Default listing then press Enter to continue.
The Enter a root password screen displays.
5. In the entry and confirmation fields provided, enter the root password then press Enter to continue.
Figure 37. Root password entry screen
6. From the Confirm Install screen, press F11 to proceed with the installation.
The ESXi installation status screen displays, followed by the Installation Complete screen.
7. Remove the USB drive from the system and press Enter.
The VEP1405 system reboots.

Configure BIOS to boot from SSD

To configure the BIOS to boot from the SSD:
1. After the system reboots, press the Delete key to enter the BIOS.
The BIOS screen displays.
2. Use the arrow keys to select the Boot tab.
3. From the Boot Option Priorities section, select UEFI OS SATA Flash Drive as Boot Option #1.
Download and install VMware ESXi 7.0
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emc vep1425Emc vep1445Emc vep1485

Table of Contents