Samsung SPH-M910 User Manual page 30

Sprint
Hide thumbs Also See for SPH-M910:
Table of Contents

Advertisement

Status Bar – Status Icons
– Speakerphone feature is enabled.
Speaker
Battery Strength
charge level. (Icon shown is fully charged.)
Battery Low
– Shows your current battery
charge level is very low.
Device Power Critical
battery only has three percent power remaining
and will immediately shutdown. Represented as
a blinking icon.
Bluetooth Active
active and enabled.
Bluetooth Connected
active and communicating with an external
device.
GPS Location On
and available for location-based services such
as GPS Navigation (see page 188).
GPS Communicating
on and communicating.
16
2A. Device Basics
– Shows your current battery
– Shows your current
– Bluetooth technology is
– Bluetooth technology is
– Device location feature is on
– Device location feature is
Status Bar – Status Icons
– Wi-Fi is connected, active,
Wi-Fi Connected
and communicating with a Wireless Access
Point (WAP).
Wi-Fi Connection Issue
– Wi-Fi is active but there
is a communication issue with the target
Wireless Access Point (WAP).
– The internal microSD
MicroSD Unmounted
card has been disconnected (unmounted) from
the device and is now ready for either removal
or formatting.
– The internal microSD
Preparing for Mounting
card is being prepared for mounting to the
device. This is required for communication with
the internal microSD card.
USB Connection
– The device has detected an
active USB connection.
– The device has
USB Debug Connection
detected an active USB connection and is in a
USB Debugging mode.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Intercept

Table of Contents