Table of Contents
Advertisement
{ Remove the two pieces of tape from the sheet.
{ Insert the sheet with the sticky side out (toward you) and down (going into
{ Adjust the paper guide to the edge of the cleaning sheet.
{ Make sure the printer is on.
{ Press RESUME to advance the cleaning sheet into the printer.
{ Press RESUME again to start cleaning.
{ The printer feeds the sheet and then ejects it.
{ Use a cleaning sheet once only.
)DEULF 6KHHWV )6
Fabric sheets FS-101 for Canon printers come with a booklet that describes special
handling procedures. Be sure to look through this booklet for special information
regarding the Fabric Sheets. This section describes specific steps for using Fabric
Sheets with the BJC-4200.
Be sure to follow these guidelines.
the sheet feeder).
Advertisement
Table of Contents
