Samsung Replenish SPH-M580 User Manual page 164

2.
To manually add your new network connection:
Touch Add Wi-Fi network
Enter the Network SSID. This is the name of your
Wireless Access Point.
Tap the
Security
This must match the current security setting on
your target WAP.
If secured, you will also need to enter your WAP's
password. The
password as you type it vs only showing asterisks
(****).
Tap to store the new information and
Save
connect to your target WAP.
Note:
The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
To manually scan for a Wi-Fi network:
Note:
Wi-Fi must be turned on in order to scan for a network.
1. Press
>
Wireless & networks > Wi-Fi settings.
150 3B. Web and Data Services
.
field and select a security option.
show password option , reveals the
and tap
>
2.
Press and tap
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status
at a glance:
– Wi-Fi is connected and active.
– Wi-Fi active but there is a communication
issue with the target Wireless Access Point
(WAP).
Using the Wi-Fi Settings Menu
The
Wi-Fi settings - Advanced
up many advanced and IP settings for your device's
Wi-Fi service, including:
Setting your Wi-Fi sleep policy
Entering Proxy and Port Information
Viewing your device's MAC Address
Configuring use of Static IP
To access the Bluetooth Settings menu:
1.
Press
>
Wireless & networks > Wi-Fi settings
.
Scan
menu allows you to set
and tap
>
.