Samsung Captivate Glide SGH-I927 User Manual page 131

Enter a wireless password if necessary.
3.
Manually add your new network connection
Tap Add Wi-Fi network.
1.
Enter the Network SSID. This is the name of your Wireless
2.
Access Point.
Tap the Security field and select a security option. This
3.
must match the current security setting on your target
WAP.
If secured, you will also need to enter your WAP's
4.
password.
From the Home screen, tap
1.
and network Wi-Fi settings.
Press Scan.
2.
e new information and connect to your target WAP.
3.
Note: The next time your device connects to a previously accessed or
secured wireless network, you are not prompted to enter the WAP key
again, unless you reset your device back to its factory default settings.
Settings Wireless
Turning Wi-Fi Off
From the Home screen, tap
1.
and network Wi-Fi settings.
Tap the Wi-Fi field to deactivate the feature. The green
2.
checkmark will be removed.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
cause an added drain to your battery and reduce your use times.
Manually Scan for a Wi-Fi Network
From the Home screen, tap
1.
and network Wi-Fi settings.
Press Scan.
2.
Auto Connect to AT&T Wi-Fi Hotspots
With the Auto Connect feature, you can set up your phone to
automatically connect to AT&T Wi-Fi Hotspots as soon as they are
detected.
From the Home screen, tap
1.
and network Wi-Fi settings.
Tap Auto connect to make a checkmark and activate the
2.
feature.
Settings Wireless
Settings Wireless
Settings Wireless
Connections 126