(M4X30) - Panasonic FV-08VK1 Installation Instructions Manual

3. Install the suspension bracket and the flange of fan body
to joists by using long screws (M4X30) ( If spacing A
between joists is 12 inches, install the flange of fan body
according to Fig.3-2, others according to Fig.3-1 to install
the product)
4. Install the suspension bracket to joists by using long
screws (M4X30) and secure it to the fan body by
II
using screw (M4X10) (Fig.4)
5. Remove junction box cover and secure conduit or
stress relief to junction box knock-out hole. (Fig.5)
6. Refer to wiring diagram of page 4.
Using wire nuts, connect house power wires to
ventilating fan wires:
black to black; white to white; green to green;
Replace the junction box cover.
CAUTION:
Mount junction box cover carefully so that lead
wires are not pinched.
7. Install a circular duct and secure it with duct tape
or clamps.
Fan body
Joist
4-Long screws(M4X30)
Fan body
2-Long screws

(M4X30)

Conduit
Junction box cover
Conduit or wiring
Junction box
Lead wires
Green wires
7
Fig.3-1
Joist
2-Long screws
(M4X30)
Fig.3-2
II
Screw (M4X10)
Fig.4
Duct
Duct tape
Wire nut
Fig. 5