Panasonic FV-08VK1 Installation Instructions Manual page 6

1. Before installation, open the orifice cover. Secure the fan
body to adaptor by using thumb screw. (Fig.1)
Press and hold the claw of orifice cover to open
the orifice cover.
Claw
IMPORTANT:
Remove the tape from damper and adaptor
before installation.As show below:
Adaptor
2. Insert the supension bracket into the fan body and
adaptor. (select the suspension bracket as show below)
Spacing A on center Joists Insert Suspension bracket
12 inches
16 inches
19.2 inches vertical joists
24 inches
If spacing A on center joists is 24 inches, connect
suspension bracket
as show below :
Suspension bracket III
2
1
Orifice cover
Damper
Remove the tape
A
Joists
Refer to Fig. 2-1
Refer to Fig. 2-2
Refer to Fig. 2-3
Refer to Fig. 2-4
II III
and (C4 mark to C4 mark)
I
2-Screw (M4X8)
Suspension bracket II
Thumb screw
Fan body
Suspension
bracket I
Fan body
Suspension
bracket III
Fan body
Suspension
bracket III
Suspension
bracket II
Fan body
6
Orifice cover
Fan body
Fig.1
Suspension
bracket I
Fig.2-1
Suspension
bracket III
Fig.2-2
Suspension
bracket I
Fig.2-3
Suspension
bracket I
Fig.2-4