Pioneer PDP-433MXE Service Manual page 174

PDP-433CMX, PDP-433MXE
9
AUDIO INPUT (Stereo mini jack)
Use to obtain sound when INPUT1, INPUT2 or INPUT5
is selected.
Connect this jack to the audio output connector of the
device connected to the plasma display's INPUT1 or
INPUT2, or to the audio output connector of the device
connected to the video card's INPUT5.
0
AUDIO OUTPUT (Stereo mini jack)
Use to output the audio of the selected source
component connected to the plasma display to an AV
amplifier or similar component.
-
MAIN POWER switch
Use to switch the main power of the plasma display on
and off.
=
AC INLET
A power cable is furnished with the plasma display;
connect one end of the power cable to this connector,
and the other end to a standard AC power source.
~
SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 -16 Ω.
174