Checking The Driver's Installation - Sony VGN-S4HP/B User Manual

Checking the Driver's Installation

When the computer restarts, check that the device is working properly.
To check the driver's installation
1 Click Start and then Control Panel.
2 Click Performance and Maintenance.
3 Click System.
4 Click the Hardware tab, then click Device Manager.
5 Double-click the option corresponding to the device you installed, then double-click your device.
The Properties dialog box appears.
6 Make sure that the This device is working properly message is displayed under Device status.
7 Click OK.
Close all the opened windows, your device is ready for use.
The device is not working properly in the following cases:
Your device is shown in Device Manager with a yellow question or exclamation mark.
Right-click your device and click Uninstall. Then repeat from step 2 in Installing a Driver
Double-clicking the category of your device in the device manager list does not display your device.
You have to remove your device. See Uninstalling a Driver
Driver (page 112).
Double-clicking Other devices displays your device.
You have to right-click your device, then click Uninstall. Repeat from step 2 in Installing a Driver
(page 117) to remove it. Then repeat from step 2 in Installing a
Customizing Your VAIO Computer
(page 112).
(page 112).
n N
114