Connecting A Vcr Or Similar Device; Connecting To A Satellite Or Digital Tuner; Eight Basic Operations - Getting To Know Your Dvd; Recorder - Sony RDR-GX330 Service Manual

Connecting a VCR or Similar Device

After disconnecting the recorder's AC power cord from the AC outlet, connect a VCR or
similar recording device to the LINE IN jacks of this recorder.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack)
(page 66).
For details, refer to the instruction manual supplied with the connected equipment.
To record on this recorder, see "Recording from connected equipment without a timer" on
page 48.
Connecting to the LINE 1 IN jacks
Connect a VCR or similar recording device to the LINE 1 IN of this recorder. If the equipment
has an S-video jack, you can use an S-video cord instead of an audio/video cord.
OUTPUT
VIDEO AUDIO S VIDEO
L R
Audio/video cord S-video cord
(not supplied) (not supplied)
to LINE 1 IN
: Signal flow
24

Connecting to a Satellite or Digital Tuner

Connect a satellite or digital tuner to this recorder using the LINE 1 IN jacks. Disconnect the
recorder's AC power cord from the AC outlet when connecting the tuner.
To use the Synchro-Rec function, see below.
Audio/video cord
(supplied)
to LINE OUT
to LINE 1 IN
Audio/video cord
(not supplied)
: Signal flow
b
If you want to use the Synchro Rec Notes
• Synchro-Recording does not work with some
function
tuners. For details, see the tuner's operating
This connection is necessary to use the
instructions.
Synchro-Recording function. See
• If you disconnect the recorder's AC power cord,
"Recording from connected equipment with a
you will not be able to view the signals from the
timer (Synchro Rec)" on page 47.
connected tuner.
26
All manuals and user guides at all-guides.com
b
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals through a VCR, you may not receive a clear image on your TV screen.
• If you disconnect the recorder's AC power cord, you will not be able to view the signals from the
Connecting to the LINE 2 IN jacks on the front panel
VCR, etc.
Connect a VCR or similar recording device to the LINE 2 IN jacks of this recorder. If the
equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord.
DVD recorder
z Hint
When the connected equipment outputs only monaural sound, connect to just the L(MONO) and VIDEO
input jacks on the front of the recorder. Do not connect the R input jack.
b
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment's input jack with the other
• Do not connect more than one type of video cord between the recorder and your TV at the same time.

1. Inserting a Disc

TV
+
-R
INPUT
DATA CD
VIDEO
L
AUDIO
R
1
DVD recorder
2
Satellite tuner, etc.
R L VIDEO
AUDIO
OUTPUT
1-6
Notes
DVD recorder VCR
Be sure to connect your VCR to the DVD recorder and to your TV in the order shown below. To watch
video tapes, watch the tapes through a second line input on your TV.
VCR
DVD recorder
connected VCR.
OUTPUT
S VIDEO VIDEO
S-video cord
(not supplied)
to LINE 2 IN
: Signal flow
Notes
equipment's output jack connected to the input jack of this recorder. This may cause noise (feedback).

2. Recording a Program

Eight Basic Operations
— Getting to Know Your DVD Recorder
+
RW -RW
-R
Video
This section introduces the basic operation to
+
RW -RW -RW R -R
VR VR
Video
record a current TV program to a disc (DVD).
DVD VCD CD DATA DVD
Video
For an explanation of how to make timer
recordings, see page 39.
Z OPEN/
CLOSE
DISPLAY
Press Z OPEN/CLOSE, and place a
disc on the disc tray.
z REC
x REC
STOP
Recording/playing side facing down
Press Z OPEN/CLOSE to close the 1
Insert a recordable DVD.
disc tray.
2
Press CH +/– to select the channel or
Wait until "LOAD" disappears from the
input source you want to record.
front panel display.
3
Unused DVDs are formatted
Press REC MODE repeatedly to select
automatically.
the recording mode.
• For DVD-RW discs
Each time you press the button, the
DVD-RWs are formatted in the
display on the TV screen changes as
recording format (VR mode or Video
follows:
mode) set by "Format DVD-RW" in
the "DVD" setup.
• For DVD-R discs
DVD-Rs are automatically formatted in
For more details about the recording
Video mode. To format an unused
mode, see page 39.
DVD-R in VR mode, format the disc
4
Press z REC.
using the "Disc Information" display
(page 37) before you make a Recording starts.
Recording stops automatically after
recording.
8 hours of continuous recording or when
If the disc is recordable on this recorder,
the DVD is full.
you can manually re-format the disc to
make a blank disc (page 37).
TV
Line input 1
TV
Line input 2
VCR, etc.
AUDIO
L R
Audio/video cord
(not supplied)
DVD recorder
25
+
-RW R -R
VR VR
Video
CH +/–
REC MODE
TV/VIDEO
,continued
27