Using Your Notebook Computer
Using a Second Battery Pack
If you attach two battery
packs, you can remove either
of them without shutting
down the computer. When
removing one battery pack,
make sure that the other
battery pack's indicator is on.
If the indicator of the battery
pack you are going to remove
is on, right-click
on the task
tray and click the "switch
discharge battery" menu.
To remove the second battery pack
1
There is a RELEASE lever on the bottom of the weight saver. To remove the
battery pack, slide the RELEASE lever on the bottom of the computer in the
direction of the arrow.
2
Remove the weight saver, and then pull out the battery pack.
3
Reinsert the weight saver. See "Using the Weight Saver" on page 65.
Drive RELEASE lever on bottom
64
n N