Table of Contents
Advertisement
Using Video software
To toggle between Continuous Capture mode and Single Frame Capture mode, proceed as follows:
1
Click Settings in the DVgate Still window.
2
Choose Capture...
The Capture Settings window appears.
3
Select the Capture frames continuously option button to capture in Continuous Capture mode.
Clear the Capture frames continuously option button to capture in Single Frame Capture mode.
To capture pictures, proceed as follows:
1
Make sure you have installed DVgate from the application CD, if applicable (see the printed
Specifications sheet and Application CD Guide).
2
Connect the DV device to your computer.
3
Launch DVgate Still (Start/Programs/DVgate/DVgate Still).
The DVgate Still window appears.
4
Set the DV device to the Play or Pause mode.
The video image appears in the Monitor window.
5
Click the Capture button.
The video image in the Monitor window is being captured.
Dragging the slider in the Capture window to the left or right lets you display the still
picture before or after the current one.
!
If you exit DVgate Still without saving the captured still picture, it is cleared.
!
Even if you attempt to capture continuous pictures, you may not be able to capture some
frames. In this case, exit all applications other than DVgate Still and then retry to capture
them.
n N
26
Advertisement
Table of Contents
