Table of Contents
Advertisement
Using the product recovery CD-ROMs
Changing the partition sizes of the two hard drives means that you will lose all the data stored on both your
C: drive and your D: drive.
You should allow one hour for the recovery process.
To perform a recovery with options, proceed as follows:
1
Select the button next to Option Recovery.
2
Click Next.
You now have three options:
Default System Drive Recovery, (see Recovering the system without changing partition sizes
(page
Change Partition Size and Recover.
Recovery To Originally Shipped State.
Manually changing partition sizes
Choosing Change Partition Size and Recover allows you to manually select the size of your C: drive,
leaving the remaining gigabytes to the D: drive. Meanwhile, all current partition sizes are deleted, the hard
disk is reformatted, and all the original software is restored as with a standard system recovery.
You should allow one hour for this process.
To manually change the partition sizes and perform a system recovery, proceed as follows:
1
Select the button next to Change Partition Size and Recover.
2
Click Next.
3
In the following screen, set the size of your C: drive in gigabytes, or choose to restore the default size by
pressing Default.
4
Click Next.
5
Read the summary of the recovery process about to be performed and click Next to start the process.
114)).
n N
115
Advertisement
Table of Contents
