Sony PCG-TR5MP Hardware Manual page 85

Hardware Guide
To connect a TV to the port replicator, proceed as follows:
1
Attach the port replicator to your computer.
2 Plug one end of the audio/video cable (1) (optional) into the Audio out (R - L) and Video out connectors (2) on your computer and
the other end into the Audio (R - L) and Video connectors on your TV.
3
Plug one end of the S-Video cable (3) (optional) into the S-Video out connector (4) and the other end into the S-Video connector
on your TV.
4 Switch the input channel of the TV to external input.
5
Set up the TV configuration system.
✍
Which cable can I use to connect my VAIO equipped with an Audio/Video port to a TV? You
need to use an AV cable which has a minijack connector on one end and 3 RCA (also called cinch)
connectors on the other end. For example, the Sony VMC-20FR which is available via direct
sales and various retailers. Please note that not all TVs have RCA in, if your TV does not have RCA
in, you need an RCA to Scart converter (provided of course that your TV has a Scart in). If your
VAIO has an S-video port, you can use this port as an alternative means of connection. Please
have a look at the Knowledge Bases on the VAIO-Link website.
n N
84
Connecting peripheral devices