Sony PCG-TR5MP Hardware Manual page 53

Hardware Guide
5 Click the Service Discovery button to find the services available for the selected device.
Sometimes when using a remote device, the confirmation for the authentication dialog box is displayed.
6
Click Yes and the Bluetooth Connection Wizard appears.
7 Click Next to continue.
8
Enter the same passkey in both your local and your remote device, and then click Next. Once the remote device has been
successfully authenticated, click Finish and the Service Discovery will be carried out.
9 Click the service icon you want to use and proceed as applicable in each profile. When the connection has been completed and
the information has been sent, the service icon turns blue.
✍
Do not simultaneously use the Bluetooth function and wireless communication devices which use
the 2.4 GHz band such as a wireless LAN PC Card.
The passkey can be different each time, but must be the same at both ends.
For certain devices, such as a mouse, no passkey can be entered.
!
If you changed the name of your computer during Windows setup, please go to USB Bluetooth
Device under Device Manager (Start - Control Panel - System - Hardware - Device Manager -
Bluetooth Radios) and right-click Properties. Under Advanced click Default to restore the default
name since the name of your computer and the computer name defined in BlueSpace NE must be the
same. For further information, please go to www.vaio-link.com.
n N
52
Using your VAIO computer