Connecting A Projector - Sony PCG-TR2MP Hardware Manual

Connecting peripheral devices

Connecting a projector

To connect a projector, proceed as follows:
1 Plug the RGB signal cable (1) into the
monitor/VGA connector (2) identified
by the
2 Plug the audio cable (3) (not supplied)
into the earphone connector (4)
identified by the
3 Plug the RGB signal cable and the audio
cable into the connectors of the
projector (5).
4 Connect the power cord (6) of the
projector into an AC outlet.
✍
Under certain circumstances, you may not be able to
display the computer LCD screen and an external display
or a projector at the same time.
You can toggle the output between the computer LCD-
screen and the external monitor by pressing the key
combination <Fn>+<F7>.
symbol.
symbol.
n N
84