Using The Battery Pack - Sony PCG-TR2MP Hardware Manual

Using your VAIO computer

Using the battery pack

You can use a battery pack as a source of power. The battery pack supplied with your computer is not fully
charged at the time of purchase.
Inserting the battery pack (PCG-Z1, PCG-V505 series)
To insert the battery pack, proceed as follows:
1 Move the lock lever (1) on the bottom of the computer to the Unlock position.
2 Align the grooves (2) and tabs on the battery (3) with the tabs and notches on the back of the computer,
and then slide the battery towards the computer until it clicks into place.
3 Slide the lock lever into the Lock position to secure the battery on the computer.
✍
When the computer is directly connected to AC power and has a battery pack inserted in the battery bay, it uses power from the AC outlet.
Make sure the cover is closed before inserting the battery pack.
n N
15