Step 2. Prepare The Module Extender - Agilent Technologies 11898A User Manual

• For shipping purposes, one end of the module extender is inserted into the oth-
C A U T I O N
C A U T I O N

Step 2. Prepare the Module Extender

er. Loosen the two knurled screws at the bottom of the front panel and separate
the two pieces using the handle provided on the front panel.
When installing or removing the Agilent 11898A module extender, always use
the handle provided on the front panel. Do not pull on the flexible cable or the
semi-rigid RF cable on the front panel when handling the module. Pulling these
cables will damage the cables or their connectors.
Do not use non-Agilent Technologies extender cables to operate the plug-in
module outside of the mainframe. The plug-in module can be damaged by
improper grounding when using extender cables.
Using the Agilent 11898A Module Extender

Step 2. Prepare the Module Extender

1-5