Table of Contents
Advertisement
Using Video software
3
Click the down arrow and select Import-Auto from the Mode drop-
down list.
Use the DVgate camera controls buttons to play, rewind or fast forward
the tape to the selected time code to begin capturing.
4
Press Play to start the video.
The video begins to play in the Monitor window.
5
Click Mark to mark the beginning of the first segment.
The first frame of the segment to be captured is displayed in the In/Out
list window.
Click Mark again to mark the end of the segment to be captured.
The last frame of the segment to be captured is displayed in the In/Out
list window.
Continue to mark as many segments as you want.
6
Click Capture to import the selected video segment or click Capture All
to import them all at once.
The Save as a file window appears.
7
Select the location to save the file.
8
Click the Save button.
DVgate captures the segments.
The Capturing complete message appears.
9
Click OK in the DVgate Motion window to finish.
Information about the capturing process is displayed in the Report window.
10
Click OK.
11
Exit DVgate Motion.
The Dvmotion2 window appears on the screen.
You can then save the In/Out list, which allows you to capture the same video sequences later on, or
change the In/Out settings.
n N
18
Advertisement
Table of Contents
