Sony Vaio PCG-GRX416SP User Manual page 73

Connecting peripheral devices
To remove a USB floppy disk drive, proceed as follows:
If your computer is on, wait until the floppy drive LED indicator turns off and then unplug the USB cable.


If the floppy disk drive is not removed properly, your system may crash and you may lose any unsaved
data.
If your computer is off, you can directly unplug the USB cable from the computer.


Inserting a floppy disk
To insert a floppy disk, proceed as follows:
1 Hold the disk (1) with the label side facing up.
2 Gently push the disk into the drive (2) until it clicks into
place.
Removing a floppy disk
To remove a floppy disk, proceed as follows:
When you have finished using the floppy disk, wait until the
LED indicator (1) turns off and then press the eject button (2)
to remove the disk.


Before pressing the eject button, make sure that the LED indicator is turned off.
If the disk does not come out by pressing the eject button, disconnect the floppy
disk drive from the computer.
!
Do not press the eject button while the LED indicator is on. It may damage the floppy disk.
n N
72