Selecting Display Modes - Sony PCG-FX801 Software Manual

Customizing your computer

Selecting display modes

This notebook uses the ATI video controller. You can select which display is used when the computer is
connected to an external display.
To select a display, proceed as follows:
1 Click the Start button, and then Control Panel.
The Control Panel appears.
2 Click Appearance and Themes.
3 Click Display.
The Display Properties dialog box appears.
4 Click the Settings tab.
5 Click the Advanced button.
The ...ATI RAGE MOBILITY-M1 AGP Properties dialog box appears.
6 Click the Displays tab to set the display settings.
If you are experiencing trouble displaying a movie or a picture, set the external display (Monitor or TV)
to Primary. To do so, simply deselect the Monitor or TV bottom left button to change it from
Secondary to Primary. If you cannot enable this button, press the corresponding
7 Click Apply and then OK.
You may not be able to display the notebook LCD screen and an external display or a projector at the same time, depending on the types of computer
displays and projectors you are using.
Turn on the computer after you turned off the peripheral devices.
n N
53
button.